Aihao Metal Products

Precautions in the Production Process of Stamped Parts  Stamped parts processing has become widespread in modern manufacturing. Out of all the steel materials worldwide, 60-70% are plates, most of which are processed into finished products through stamping. Stamped parts are found in products across various industries. So, what are the key points we need to pay special attention to during the production process of stamped parts? Below, Suzhou stamped parts manufacturer - Aihao Metal Products Factory will guide you through the specific precautions in the production process of stamped parts.

     1. Semi-automatic and manual punching machines for stamping parts must be equipped with a dual-hand brake switch. It is strictly prohibited to press the switch with one hand or step on it to start the machine.

     2. After the high-speed punching machine is properly adjusted during the production process of stamped parts, the soundproof box should be closed after normal stamping.

     3. During the continuous stamping process of stamped parts, employees must not handle the products with their hands within 1 meter of the stamping machine.

     When the technician is setting up and adjusting the machine, only one person should perform the task, not two.

     5. Technicians can only adjust the machine and feed materials from outside the machine, maintaining a distance of no less than 1 meter.

     6. When erecting the formwork, make sure to tighten the screws securely, and stop the machine every 4 hours to check if the screws are loose.

     7. When a mold encounters a problem during production and does not need to be removed, and can be repaired directly on the machine tool, it is necessary to first turn off the power of the injection molding machine and hang a "Under Repair" sign on the power box before carrying out mold repair.

     8. After use, all tools must be returned to the toolbox and not left on the machine platform to prevent them from falling and causing injury.

     The above are the precautions for stamping parts during production, organized by Suzhou Aihou Metal Products Factory. Aihou Metal Products Factory specializes in the production of sheet metal parts, stamping parts, machined parts, drawn parts, welding parts, and hardware processing parts. Its main business includes sheet metal parts, stamping parts, sheet metal processing, stamping parts processing, and machined parts. It has passed the IATF16949 quality system. Welcome to contact us for cooperation.